New Water Cans Part 18

 This morning I finished painting the 2 water cans by touching up with red, white and blue in places that needed it.

All there is left to do now is to sand paper the wooden handles to remove splodges of paint and revarnish them, but I will leave the cans for now to allow the paint to fully harden.

Looking forward to travelling next year with them on the cabin roof 😊

Keith

New Water Cans Part 17

 This afternoon I attempted the shadowing of the names on the 2 water can, soon after starting I got the shakes hence the poor quality, but tomorrow I will go back over the red and white to improve them. 🙁

Keith

New Water Cans Part 16

 Signwriting the water cans. Being lefthanded I have to start on the right 😊

Initial easier stage of the signwriting finished. 😊

Keith

New Water Cans Part 15

 Templates Sellotaped in place. 😊

This afternoon I pencilled in the letters through the templates, all ready for painting 😊

Keith

New Water Cans Part 14

 This afternoon I printed out 6 templates for the 2 new water cans,

these are the 2 templates not in the bin! 🤨

Keith

Finishing the New Decking

 I had another busy morning this morning, screwing the new decking down, putting everything back on the pontoon, and when Jo got home from the stables we moved all the coal back onto the pontoon. 😊

Keith

New Decking

 Busy day today fitting the new decking to our mooring, many thanks to Ian, Maria and Nigel for helping us. 😁

Keith

Pontoon Clearing

 This morning Jo and did the final clear up on our pontoon ready to lay our new decking on Tuesday. 😁

Keith

New Water Cans Part 13

 This morning I painted the 2 white stripes, then the seam, on 1 of the 2 water cans 😊.

Don't look too closely, not as good as I have done in the past 😞 

1st stripe

2nd stripe

The seam

This afternoon I painted the two white stripes and the seam on the other water can, and around the spouts of both cans 😊

Keith

New Water Cans Part 12

 This afternoon I painted the inside of the 2 water cans, not the easiest part of the paint job. 😊

Keith

New Water Cans Part 11

 3rd coat of red applied to the 2 water cans this afternoon, not that you can notice. 

I may have to do a 4th coat, will see what it is like when it has dried 😊

Keith

New Water Cans Part 10

 3rd coat of blue this morning on the 2 water cans. 😊

Keith

New Water Cans Part 9

 2nd coat of red applied to the 2 water cans this morning, and one coat inside the spout. 😊

Keith

New Water Cans Part 8

 Having bolted on both handles, and primed and undercoated them yesterday, this morning I was back on track and gave both water cans a 2nd coat of blue. 😊

Keith

New Water Cans Part 7

 This morning I primered the nuts and bolts that I fitted to the handles of the 2 water cans. 😊

Keith

New Water Cans Part 6

 Having spent nearly a month in pain in my back, I bolted on the handle that fell off the water can, I also did the same to the other one just in case it decides to come off.

Clamping the handle that fell off in place before drilling.

I drilled 2x2mm pilot holes through the bottom of the handle, then opened them out to 4mm, then I fitted the 2 bolts and nuts.

Then I did the same at the top of the handle.

The nuts fitted on the inside. I repeated all of this for the other can.

Keith